If you’re completely new to ebikes, check out this short video overview and e-book guide that’s free on Amazon if you’ve got Prime. It’s full of pictures and examples to get you acclimated to the space. I’ve also done an in depth video interview about ebikes with my uncle since he has been riding one to work every day for over a year now.
You’ll be 3 times faster on your kick scooter! Our high quality push scooters will keep you comfortable and safe while scooting with your kids or on the way to work. You’ll smile every time you get on. Our selection of adult kick scooters have… learn more
This electric motor has the more acceleration at low end, better mid range, and more top end. It’s easy to fix disk on front & rear hub motors.This e bike motor will go nearly 600RPM on 48V, also offer this wheel professionally laced into leaf double wall aluminum rims with 12g spokes. Message us for details. 20″, 24″, 26″, 27.5″(650B), 700c , 28″, 29″ sizes are available.
The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of injury or death associated with the use of thousands of types of consumer products under the agency’s jurisdiction. Deaths, injuries, and property damage from consumer product incidents cost the nation more than $1 trillion annually. CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical or mechanical hazard. CPSC’s work to help ensure the safety of consumer products – such as toys, cribs, power tools, cigarette lighters and household chemicals -– contributed to a decline in the rate of deaths and injuries associated with consumer products over the past 40 years.
Cyclone-USA introduces a completely new electric bicycle motor kit with more power and more range than any other bicycle motor kit on the market today. The unique brushless DC motor features an integrated planetary gearbox that significantly multiplies the motor torque. The result is fantastic climbing and cruising power from a small, efficient motor. Using the standard battery pack, the Cyclone motor system can achieve 30 miles without pedaling and 40-50 miles with very moderate pedaling.
Hi Jeffrey, I’ll do my best to answer this question based on my experience testing. Mid-drive motors get a lot of attention for being efficient because they can be empowered through gear shifting if they are setup to pull the same drivetrain as you, the rider, and the bike actually has gears. So a mid-drive on a single-speed electric bike might actually be less efficient than a hub motor because it’s transferring energy through a chain or belt before reaching the rear wheel. There several mid-drive designes out there which pull a completely separate drivetrain like this, and are therefore not as efficient as they might otherwise be but still benefit the bike design by balancing weight at the center of the frame. And so, if you have something like the Bosch Centerdrive, Yamaha, Impulse, Brose or others which pull a chain or belt and benefit from the mechanical advantage of a cassette, internally geared planetary hub or continuously variable transmission AND you actually shift appropriately… then you will generally go further, climb easier and even accelerate faster than most hub motors. Geared and gearless hub motors usually have a sweet spot for efficient operating speed RPM and that is usually translated to above 10 mph on the bike. So when you start from zero the motor is struggling and only once you’re reaching those higher speeds does the motor start to “relax” and perform optimally. I hope this helps, there are some excellent hub motor designs out there… they tend to be easier on the drivetrain and less expensive but increase unsprung weight (if the wheel is on a suspension) and can create imbalanced weight distribution compared to mid-drives.
^ a b c Chi-Jen Yang (2010). “Launching strategy for electric vehicles: Lessons from China and Taiwan” (PDF). Technological Forecasting and Social Change (77): 831–834. Archived from the original (PDF) on 2010-03-31.
If any one battery cell varies significantly from the others, do NOT connect it to the other cells. Paralleling two or more cells of different voltages will cause an instantaneous and massive current flow in the direction of the lower voltage cell(s). This can damage the cells and even result in fire on rare occasions. Either individually charge or discharge the cell to match the others, or more likely, just don’t use it in your pack at all. The reason for the voltage difference could have something to do with an issue in the cell, and you don’t want a bad cell in your pack.
In summary, the drive system you choose will impact the overall weight and weight-distribution of your electric bike. It will provide more or less efficiency for riding fast, climbing or navigating bumps and it will cost more or less depending on how customized the frame is and whether it offers regeneration and special sensors for shifting gears. I lean towards geared hub motors for affordable light weight around-town transportation, direct drive hub motors for quieter riding, increased power and regenerative braking and mid drive motors for mountain biking or lots of hill climbing.
I finally made it happen on BMS #3 (the unfortunate thing about AliExpress is that every dumb mistake that kills a part is another month added to the project) and the battery seems to work great, though it only has a couple miles so far.
Wear gloves. Work gloves, mechanic gloves, welding gloves, even latex gloves – just wear something. High enough voltage can conduct on the surface of your skin, especially if you have even slightly sweaty palms. I’ve felt the tingle enough times to always wear gloves now. In fact, my pair of choice for battery work are some old pink dish gloves. They are thin and provide great dexterity while protecting me from short circuits and sparks.
Interesting… that’s a beefy looking electric bike! I haven’t heard of Falcon or tested this bike (or anything quiet like it) but the specs are impressive. Note that it’s actually not classified as an ebike due to the large motor, it would need to be 750 watts with a top speed limited to 20 mph, and this could create a liability issue if you crash and damage property or injure someone. Given your desired range, it seems like the super large battery pack would be good, it will impact weight and handling to some extent but that’s the trade, an alternative would be a mid-drive ebike with pedal assist like the Volton 350. Note that the Falcon website doesn’t have an address, just this phone number (855)-661-7337 so it feels less trustworthy than a local dealer or large company that is more willing to expose who they are and potentially offer ongoing support. Hope these thoughts help 🙂
Cheers Court! Maybe you have some insight into a great question a friend asked me: “If there were a scientific experiment done where all variables were the same with the exception of the drive motor, one being a mid drive and the other being hub drive (both of good quality and used on higher end mainstream e-bikes), is there a clear winner when it comes to which drive system delivers more efficient power. I guess what I’m hoping to find out with this question is: Which style of drive system more efficiently transfers the potential energy in the battery into actual motion. I could see this being answered with units like distance or speed, but remember the only thing I am comparing is two types of drive systems… Things like battery size, pedaling effort, rolling resistance, total bike/rider weight, air friction are all constants. So is there a clear winner???”
Hi Miran! The Pulsar 250 watt hub motor sounds decent, for your short commute it could work fine and in my opinion front mounted hub motors are alright for basic city riding. They can change the steering dynamic and handling a bit but with a small motor like the one you shared I don’t think it would be a big deal. I really like the Bafang mid-drive but that will be very fast, powerful and possibly illegal where you live. Also, it might be difficult to install compared to the front kit. Here is one I reviewed that might be similar to your Pulsar: https://electricbikereview.com/clean-republic/hill-topper/
Features: It is so light weight , easy to transport and to take it. It is eco-friendly and safe to use it. The battery holder is so stable and sturdy. Super powerful,safe and reliable. Suitable for bi…
We’ve learned some users love connectivity to our Electron app, while others will prefer to ride without it. That’s why we’ve engineered an app that lets you choose whether or not to use its features like distance and speed tracking, battery life readouts, assist levels, and ride mapping. If those aren’t for you, just calibrate your wheel once with our app, and then enjoy the wheel free from any device.
Hi Vincent! In my opinion, there are a whole bunch of great possibilities out there. Luna has high powered stuff and the BBSHD worked great for me when reviewing a Lectric Cycles conversion a year back (using their e-RAD kit). Of course I also like BionX but the stuff is more expensive and proprietary. I’m doing less conversions these days (at least review wise) so I’m a bit behind on the category. For me, the frame makes a big difference and depending on what sort of terrain I’m encountering I’ll lean towards hubs for smooth and zippy feel or mid-drive for better climbing with the http://electricbikemotor.net that it might wear my drivetrain down, especially without shift sensing. That’s one area where e-RAD and maybe Luna now too, have some good options and accessories.
Lastly, there’s a small chance that it’s just a faulty BMS. This method is annoying, but if all else fails then you can try swapping out the BMS. More than likely though, the BMS is doing it’s job because one of the cutoff conditions is fulfilled and it’s just trying to protect the pack.