“electric bike wheel hub -mid mounted electric bike kit”

The benefit of an integrated controller is easy troubleshooting, while the drawback is inability to service a bad controller as well as a lower heat tolerance for the motor as a whole. The good news is that after many years of development, the TDCM hub is extremely reliable—we can attest to that!

Finally found it. WOW!! Exactly what was needed. I struggle with conceptualizing verbal descriptions. You solved that! With the new JP Welder from Croatia my first welded build will soon be a reality. Thanks for all you do for eBiking!

“Greetings, thought you may like to see an article about a scooter made using parts supplied by your company. It won first place in an engineering competition. Thanks for your help, and the fast delivery of the great parts!” – Dan from Tracy, CA

Hi Zoom, I really like the Haibike and Felt models because they offer full suspension or hardtail trail ebikes. They are well balanced, efficient and fairly quiet. You could build an ebike using something like the e-RAD kits if you want throttle mode and are willing to get your hands a little dirty 🙂

Hi Joseph! Sorry for the confusion… I realize it can be overwhelming when you really dig down. Two things come to mind for you regarding a good mid-drive system available after-market and the internal shifting question.

You’ll be 3 times faster on your kick scooter! Our high quality push scooters will keep you comfortable and safe while scooting with your kids or on the way to work. You’ll smile every time you get on. Our selection of adult kick scooters have… learn more

Adam Boesel, inventor of the UpCycle Ecocharger, is using Electric Bike Tech hub motors and working with GM and Chevrolet to build bicycle generators featured at the 2015 Pan Amercian Games!   Adam Boesel is using Electric Bike Technologies hub motors on bicycles that generate electricity! Now General Motors has taken his idea to the 2015 Pan American Games and is using them to show people how PLAY can literally…

I don’t think there is any danger to parallel more than 4 cells. Tesla cars have literally hundreds of 18650 cells just like these paralleled. The issue is that if you ever did have a problem with one cell, like a factory defect that caused it to short circuit, it could die and drag all the other cells down with it, killing the entire parallel group. That’s why Tesla uses individual cell fusing, but that’s not really employed on the small scale like for ebikes.

Hi Vincent! In my opinion, there are a whole bunch of great possibilities out there. Luna has high powered stuff and the BBSHD worked great for me when reviewing a Lectric Cycles conversion a year back (using their e-RAD kit). Of course I also like BionX but the stuff is more expensive and proprietary. I’m doing less conversions these days (at least review wise) so I’m a bit behind on the category. For me, the frame makes a big difference and depending on what sort of terrain I’m encountering I’ll lean towards hubs for smooth and zippy feel or mid-drive for better climbing with the understanding that it might wear my drivetrain down, especially without shift sensing. That’s one area where e-RAD and maybe Luna now too, have some good options and accessories.

I am trying to decide if I need a 350 watt hub motor for a bike conversion or would a 500 watt hub motor be better. I weigh almost 230 lbs but live where there are minimal hills. My husband would be doing the conversion with an all inclusive kit. Does a person’s weight have anything to do with what size motor you buy?

next the the smaller diameter 9c, the hubzilla looks to be an oversized version of the 9c.[img src=https://www.electricbike.com/wp-content/flagallery/hub-motors/thumbs/thumbs_leafmotor.jpg]6100Leaf Motor

A lithium battery is the heart of any electric bicycle. Your motor is useless without all of that energy stored in your battery. Unfortunately though, a good ebike battery is often the hardest part to come by – and the most expensive. With a limited number of electric bicycle battery suppliers and a myriad of different factors including size, weight, capacity, voltage, and discharge rates, finding the exact battery you are looking for can be challenging and lead to unwanted compromises.

Off road, off the map, on an adventure, the ProdecoTech trail eBikes feature state-of-the-art components like RockShox and SRAM shifters to ensure reliability on the toughest terrain. With a powerful motor, long battery life and incredible top speeds. ProdecoTech trail eBikes are setting a new standard for outdoor adrenaline driven trail adventures.

Thank for the great article. I made battery packs already, do you have any recommendations on chargers. I have a 53 volt pack 30 amp hr. I don’t know what charger to buy, and I’m worried as lithium batteries tend to blow up if not handled correctly.

We do not deliver on Sundays, but do sometimes deliver on Saturday depending on the carrier that is delivering your order. The best way to determine the date of delivery is to check the status in My Account .

It seems like there’s a lot of options out there, even on individual bikes…better batteries, better components, etc. Where’s the happy medium for a price-conscious, street-riding only, out of shape blind guy?

More than likely this problem is BMS related. The BMS usually trips in that scenario for one of two reasons: 1) The load pulled by the controller is too high for that BMS, or 2) one or more cells are weak or damaged and when the load is applied strongly, it causes the voltage of that parallel group to drop below the LVC of the BMS.

I am currently building my own 36v battery and now using some of the ideas you have put here. but I am wondering what is going to be the best charger for charging the battery?? As I am doing on the cheap, I am utilising a 12v 6A charger which I previously had. My plan was to couple with a 12v to 36v step up DC transformer but then realised that this may not be enough to charge the battery fully. This is because the full charge voltage on the battery is actually 41v which would be higher than the step up transformer. The next option is a 48v charger which would be too high.. Or would the BMS kick in and protect from over voltage?? This is all theory at the moment so I am probably missing something.. Could you suggest a charger method. Am I on the right track?

A solid all-around mid-drive electric bike kit with shift sensing, pedal assist and throttle override offering 500 watts of nominal power output. Two battery size options, available in downtube or rear rack styles, optional Race Face performance……

How do you determine this exactly? Your battery is a 36v 8.7Ah and I guess it has something to do with the maximum continuous discharge rate. It would help me (and maybe others) to explain why 30A is more than enough for this battery.

You told us what you wanted and now we’re delivering it. ShippingPass is our new subscription program designed to bring you unlimited 2-day free shipping for one year with no minimum order. Get what you need ― fast!

I continued with all 10 sense wires, placing the last one on the positive terminal of the 10th parallel group. If you aren’t sure about which groups are which, or you get confused, use your digital voltmeter to double check the voltages of each group so you know you are connecting each wire to the correct group.

Cell Model Samsung 2900mah. BATTERY CELL -18650 Rechargeable Lithium Battery cell. It also comes with aUSB CHARGING PORT which can be used for charging your http://electricbikeframes.com Battery Type: Dolphin Type Lithium Battery.

I then took my second sense wire (or your third sense wire if you have one more sense wires than parallel groups) and soldered it to the positive terminal of the second parallel group. Again, note that I’m soldering this wire to the nickel in between cells to avoid heating any cell directly.

aliexpress: http://www.aliexpress.com/item/e-bike-battery-24-volt-lithium-battery-pack-25Ah-for-backup/32446161781.html?spm=2114.031010208.3.9.x1znRh&ws_ab_test=searchweb201556_6,searchweb201644_3_79_78_77_82_80_62_81,searchweb201560_1

The battery maximum power = volts x amps, so if this 36V battery can deliver 30A continuous, that means it can deliver a maximum of 1,080 watts, though I would run it conservatively at a lower power level than that in most applications.

Leave a Reply

Your email address will not be published. Required fields are marked *