You can buy LiFePO4 straight from China from Ping Battery. These batteries are a little bulky, but are safe, and will last over 1000 charges. You can also buy ready made Lithium Iron Phoshate (LiFePO4) or Lithium Polymer (LiPo) packs from BMS battery.
This is truly inspiring, this has helped me out in so many ways, I have a few questions I want to ask please. I was looking to withdraw amps by making connections from the battery directly but charging it through the bms as my bms is similar to yours max withdraw of 40 but I need upto 50a. and also are most BMS self balancing ? Meaning wil they always try to balance themselves even when they are not being charged ? Hope to hear from you soon kind regards
As the e-bike concept grows in global aceptance, the electric bike conversion kit makes more sense for a variety of reasons. The hard-core bicycle enthusianst will appreciate the flexability of upgrading their favorite ride with an e-bike kit, while e-bike neophyte can experience personal electric transportation for a relatively modest up front outlay.
Here is a an example of a large format soft pouch LiPo pack with 13 cells, and a BMS. This pack was built using cobalt LiPo soft cells with a BMS from a Chinese factory for an electric bike. You can see the top cell has been squished, causing the cell to fail and the BMS to shut down the battery, and not allowing it to charge or discharge. This pack is small and light (7lbs). This $500 pack is now ruined, but all is not lost since it did not start a fire, and it did NOT take the house with it.
Hi, I just built and electric bike with a kit I bought from ebay, glad I found this site, it’s really help me understand what I’ve done much better and will definitely help with my next bike a 29″ EBike! Thanks!
Also changing the fuse to a higher one could cause the wires to start a fire and the whole house would burn down if the wires are not thick enough. Also in sweden a fuse gets bigger as they are rated higher so you can fit a 20A fuse in a 10A slot, for safety.
1 x 24V 500W Motor Brushed Controller. Electric Bike scooter twist throttle accelerator with power display, 5Led battery indicator. Motor brushed controller for Electric bicycle & scooter. Qty: 2PCS (…
” Electric Bicycle I purchased from you guys has been outstanding. I have had it now for almost 1 year and I use it everyday to commute to work 2 miles from my home. Everyone at the office always comments on how great of a idea I had. I also bought one for my 2 son’s and one for my wife. Electric Bicycle folds up easily for transportation in my car so I can take it with me everywhere I go. ”
An exceptionally affordable, feature rich electric bike, built around an approachable frame that’s easier to mount and stand over, offers pedal assist and throttle override operation. The battery pack is protected by the top tube, positioned low and center along the……
Hi Joseph! Sorry for the confusion… I realize it can be overwhelming when you really dig down. Two things come to mind for you regarding a good mid-drive system available after-market and the internal shifting question.
Preowned Shimano E-Tube Di2 internal battery charger. Model SM-BCR2. USB connection. Comes as shown. No packaging. Shipping to USA only (Sorry. No exceptions) via USPS 1st Class Mail at a flat rate of $4.
According to some quick research I did, a city block is about 100,000 square feet which means that you can fit 17 blocks per mile. Given your round trip distance of 14 blocks… that’s way less than one mile and in my experience the new EVO line of Easy Motion bikes (which have ~417 watt hour batteries) will get upwards of 15 miles per charge even after hundreds of uses and on uneven terrain. Of course, your weight and the hills and wind all have a factor but you should be very good for just a mile or two of use.
The Stromer ST2 uses an exclusive hub motor developed by TDCM for Stromer that is being marketed as “Syno-Drive.” The Syno-Drive hub motor has a number of design changes that make it perform better, weigh less, and run smoother than any other drive system we’ve tried.
Some power-on-demand only e-bikes can hardly be confused with, let alone categorised as, bicycles. For example, the Noped is a term used by the Ministry of Transportation of Ontario for e-bikes which do not have pedals or in which the pedals have been removed from their motorised bicycle. These are better categorised as electric mopeds or electric motorcycles.
The spacers you linked to make battery building a bit easier as you can set it up modularly, but as you indicated, they add a good amount of volume to the battery. I like to make my batteries as small as possible so I rarely use them. When I do, I use these ones, but it’s not very often.
Can be used on Pocket Bikes, Mini Choppers and More. Parts Scooter pocket bike & More. Pit Bike Parts Honda 50 & More. ElectricThrottle Control . We will be happy to take care of the issue. chec…
Also, since the negative electrode is the entire bottom and sides of the cell (formed by a metal cylinder) these cells can take some bouncing around. Be aware if you scratch the plastic wrap on the cylinder, the metal shell underneath is energized to the negative electrode, so…an electrical short may be possible.
First thing is regarding the cells – I have http://electricbikemotor.net order some Panasonic 18650PF like yours by chance (I was looking for Samsung). The delivered cells were made and charged in 2014, and the measured voltage now is around 3V (+/- 0.1v). So the voltage is basically the same for all of them but there are old, I think, even thaw never used and stored in a warehouse.
Yamaha’s newest entry into the electric bike market shows a lot of potential. It’s no surprise: Yamaha has been building electric bike systems for more than 20 years, has millions of systems on the road, and produces nearly 300,000 units annually.
Hub motors were the first type of drive systems for bicycles to be patented and they continue to be popular today. Instead of trying to integrate a motor into the bicycle drivetrain (complimenting the gears and chain that the rider uses) hub motors stay completely separate. Electricity is run through copper wires to create electromagnets which repel traditional rare Earth magnets and create force that rotates the hub forward (and sometimes backwards). In the early days brushed motors were used because they are inexpensive and require less sophisticated control systems but the brushes wear out over time and require replacement. These days, nearly every hub motor (geared or gearless is brushess and uses direct current DC).
What makes Panasonic the benchmark in the industry for performance and reliability is an initial, consequential design decision: the middle motor. By placing the motor in the middle, the motor is able to gain the mechanical advantage of the gears on the bike, which amplifies the power of a small motor and allows it to efficiently power a rider up any hill. The placement of the motor in the middle also allows for simpler servicing—as the motor is one unit that can be easily removed—as well as keeping most of the rest of the components standard, another benefit for service.
But there’s still another issue: now if I just slip my pack inside some shrink wrap tube, I’ll still have exposed ends. This is more or less ok structurally, though it won’t be very water resistant and it will look a bit less professional.
hello. I have a KTM bike-trail’s 2013 model. I have problems with the battery. I had the bike wheel and I bought one original ktm 26V from the company. defect occurs so: I put the plug on the charger to charge the battery and flashing green LED lights and red and it is immediately interrupted – interrupted flashing red and the buzzer sounds and noises that can fix … ? Please help me if you know how. sorry for my English but I used google translator
It is always a good idea to stock up on fresh replacement batteries for your electric bike or scooter. You can find batteries, tubes, tires and a series of other generic parts standard for any bike or scooter at NYCeWheels.
Fat tires aren’t just for sand and snow, cruise your city with the @igoelectric Folding Fat! #foldingfatbike #fatbike #fattiesfitfine #fatbikelife #foldingbike #ebike #electricbike #electricbikes 02.02.2018 – 19:56
Fat E-Trike from Sun and E-BikeKit™ at Interbike 2014 Fat bikes and electric bikes were all the rage this year at interbike in Las Vegas. It seemed almost every bike vendor at the show has at least one fat bike model in their booth this year. On top of the fats were the electric bikes. And I think it goes without saying that nobody wants to actually pedal a fat…
As far as dimensions, I prefer to use 0.1 or 0.15 mm thick nickel, and usually use a 7 or 8 mm wide strip. A stronger welder can do thicker strip, but will cost a lot more. If your welder can do 0.15 mm nickel strip then go for it; thicker is always better. If you have thinner strips then that’s fine too, just lay down a couple layers on top of each other when necessary to create connections that can carry more current.