“e-bike motor lithium ion battery for electric bike”

It’s always hard to say exactly how much AH’s someone will need because every case is different. With that powerful motor sucking lots of juice and big hills though, you are going to want a minimum of 48V20AH. If I were you I would try to go even higher, but it may be even better to simply have two batteries at that point. It’s annoying to swap them, but if you ever had a problem with a 48V30AH battery that destroyed the pack, it would be a big investment straight to the garbage. A problem in one of your smaller packs would mean you still had the other. It’s not likely to happen, but it’s something to think about.

Great questions Charles and I have no idea! Sounds like a cool project and I bet people in the Stromer forums could help you with tips. I heard the ST1 models could be unlocked to go faster but I have less experience with the ST2. Adding a front hub motor would be really neat but make sure it works with the larger thru-axle or consider swapping the fork. I think adding suspension would improve the ride a lot and enable a front hub motor but not sure how you’d wire in a second battery or whether you could use the existing one? Would love to hear how it all turns out or see pics someday 😀

One of the biggest questions about electric bikes is “What’s the difference between motors?” and that’s because there are several different types including geared and gearless hubs, mid-drives and shaft drives. Not to mention brushed and brushless… I’m hoping this post can help to clarify the space a bit so you can focus in on finding the right ebike for your intended use.

Disagree, hubs can be much quieter… some offer regeneration and they area all easier on the chain and sprockets. For a hardtail trail bike or road bike they work really well and tend to cost less. Each technology offers some great benefits 🙂

The current GNG is much better than the GNG it replaced. GNG addressed the weak points of the previous model and updated its looks. The Lightning Rod unit may have been an awesome upgrade last year, but now the game has changed.

This kit http://huntneqip.com also been run at 72V X 30A = 2,200W/3-HP (with a different controller), but be aware that this level of power requires a swap to a chain primary reduction, or a wider belt. Also, the GNG allows for a stronger crankset to be swapped-in for riders who like radical jumps without bending the spindle (the BBS02 crankset cannot be upgraded).

Only charges Internal BTR2 battery / Will not charge External BTR1 battery. Note : All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions.

What a great article! It has opened my eyes to lots of possibilities. Being new to this I had a couple of questions. I am interested in building a spare battery to give me more range on the Faraday Porteur. My question is how to connect the battery I would build to the bike. The main battery resides in the downtube and the connection is hidden. They offer an ancillary battery that plugs into the charging port which is what I would like to build myself rather than buy. Do you think this would be possible? Where could I find a connector that would match? Any concerns? If so, what other options do you suggest? Thanks so much for the help!!

I use white 2mm thick craft foam and cut out a shape slightly larger than my pack. I wrap it up and seal it with electrical tape. It doesn’t have to be pretty, it just has to cover the pack. Your next step will hide the foam from view.

Description: Use this 1000W 48V 26″ electric bike conversion kit to transform your bike and eliminate the need for purchasing a brand-new electric scooter. The motorized wheel, electric controller, …

In some cases a front mounted hub motor is preferred because it allows an internally geared hub or continuously variable transmission CVT hub such as the NuVinci to be used in the rear. Some of the newest electric bikes like the Smart ebike combine an internally geared hub (that the cyclist pedals) with a hub motor and are able to put both in the rear wheel.

Hi Court, Love your work. It appears that you have one of the best jobs going! Just wondering if you are considering reviewing the 2016 KALKHOFF INTEGRALE 8 any time soon? If so I would be interested to hear the noise level of the Impulse EVO RS mid drive system coupled with the Gates belt as I intend to commute 75 km per day and want a really quite and fast commuter

Hi Pâmini! Yes, I’ve definitely been planning to review the Spicy Curry and I agree with you that the smaller 20″ rear wheel helps to improve balance. It also improves power because less torque is required to turn a smaller wheel. For the price, it seems like one of the best options. You can see my thoughts on the TranzX mid-drive motor by watching this review of the IZIP E3 Peak which uses the same setup. I admit that I do not like this drive system quite as much as Bosch but it is getting better and for the price it is quite good. I hope you and your girls have a blast riding whatever bike you choose and maybe in time you can let one of them tag along with a trailer like this that teaches riding. Also, here’s a video I made a while back that teaches the balance for riding a bike on your own 🙂

The Stromer ST1 uses a direct drive hub motor (like Bionx) made by the Taiwanese company TDCM. TDCM focuses on the development and production of electric drive systems for electric bikes as well as for other applications—including medical devices, starter systems, and wheelchairs, to name a few.

Output Power: 1800W. rated power: 1800w. 12/24/36/48v Universal Electric Scooter Twist Throttle Grip Universal 12v 24v 36v 48v Black Electric Scooter Bike Throttle Grip. Electric brushless Motor Type …

Now this step is very important: I’m going to turn the pack upside-down and perform this set of welds between the positive caps on the second parallel group and negative terminals on the third parallel group. Essentially, I’m welding on the opposite side of the pack as I did when I connected the first two parallel groups. Skip down a few pictures to see the completely welded pack to understand how the alternating side system works.

I figured this would be a critical step I wouldn’t want to mess up. Thanks for the advice on using the multimeter. That’s good to know as I thought I might need to open up the controller and see which wires went where on that male xlr connection which I guess would be an option too. Thanks again!

You’ll notice that for my charge wires I used larger diameter wires than the sense wires that came with the BMS. That’s because charging will deliver more current than those sense wires will. Also, you’ll notice the discharge wires (including the B- pad to the negative terminal of the pack) are the thickest wires of all of them, as these will carry the entire power of the whole pack during discharging. I used 16 awg for the charge wires and 12 awg for the discharge wires.

If you want a LiPo battery pack, one of your better choices if you want to save money and have a lot of output amps is build one of your own from a Hobby King packs. This requires a lot of time and knowledge, not only in building the pack but also in managing it.  LiPo batteries can be extremely dangerous and prone to burst into fire if not assembled with a lot of precautions (BMS) and cared for properly.

A fun, classic looking electrified tricycle designed for adults, it’s easy to mount, stable to ride and very adjustable in terms of speed and power, (go from 3 mph to 14 mph or slow reverse). Includes a rubber-coated metal basket that’s perfect for storing groceries, supplies or the included charger……

One Reply to ““e-bike motor lithium ion battery for electric bike””

  1. PikeResearch, a for-profit market research firm, released a report in 2010 which included market analysis and forecasts for electric two-wheel vehicles. They concluded that, “The worldwide electric two-wheel vehicle market is expected to grow at a compound annual rate of 9% through 2016” and that “a lack of a well-defined retail channel hampers faster adoption in North America and Europe.”[34] PikeResearch also forecasted that worldwide sales of e-bikes, e-motorcycles, and e-scooters will reach more than 466 million between 2010 and 2016, and China will continue to dominate the world market, with more than 95% of sales during this period. E-bikes sales are expected to have the largest share with 56% of the market.[35]
    Derby Cycles, Kalkhoff and Focus’s parent company, has been hard at work for the past years optimizing the design of their flagship product: the Impulse motor system. Learning from Impulse 1.0, which was introduced in 2012 and is in active service on over 150,000 ebikes around the world, Impulse 2.0 is a next-generation drive that offers better performance, quieter operation and some really bright new ideas to make what was already one of the best drive systems on the market even better. In 2015, Derby Cycles introduced the next iteration of the Impulse system, the Impulse Evo drive.
    Thanks for your kind words about my article, I’m glad it helped! To answer your question, I highly recommend avoiding a custom built charger. While it might be possible to use a DC-DC converter to change the output voltage of your 12V charger, the chances of a problem occurring are too high for my liking. The converter might not be smart enough to adjust the current down once full charge is reached. Technically your BMS should protect your battery from most overcharging scenarios, but if it is overloaded and a component fails, there is nothing to stop your cells from being destroyed.
    Court- Excellent article (and I have read a lot). I wonder if you can weigh in on a system I am trying to build. I have a Montague Paratrooper (a bike that folds). I need to fold it and put it in a drift boat. It needs to weigh as little as possible and must have a removable battery and about a 10 mile range with an average speed 20+ mph. I had sort of “settled” on a Bafaang 750 or 1000 watt with Dolphin 52V battery (kit at Lunacycle). Now I am not so sure after reading the pro/con of your article. Cost is certainly an issue and ease of installation. I have been biking with out the motor, and I have numerous fairly steep (6-8%) hills. What do you think I should do? Rear hub, smaller battery. Thanks !
    This drive is new and is VERY similar to the recently popular Bafang BBS02. This pic was taken at the April 2014 bicycle show in Shanghai, China. Pic thanks to ES member d8veh. On Alibaba, these have been seen being sold under the “BTN” label (Back To Nature). Thanks to the German pedelecforum.de member “airbox” for the link. Danke Schoen!

Leave a Reply

Your email address will not be published. Required fields are marked *