“e-bike battery |cheap electric bike conversion kit”

Hi Micah, thank you for your advice. I am not going to touch that battery. I know this may be a lot to ask, but would you build me a battery for my velomini 1 ? It doesn’t have to be the one that fits in the frame, I could put it in a bag and hang it on the handlebars or something. If more convenient you can email me directly at dlimjr at yahoo. My sincere thanks and may you and your family have a happy holiday.. Don, San Francisco

Monster Scooter Parts is a worldwide distributor of electric bike parts. Our inventory of electric bicycle parts include a number of very popular electric bike conversion kits. These cleverly designed bicycle parts convert an old but functional pedal bicycle into a really convenient and economical battery powered work horse.

I just have a simple question: I would like to replace the Nicad battery 24V / 5Ah of my old Yamaha PAS XPC26 with a 7s3p and maybe try a 8s3p for something more “punchy” (hoping the controller will not burn …) . Do you think I can buy a 10s BMS and use it with a 7s or 8s battery? In this case, what should I do with the spare balance wires ?

Next, I added the third parallel group after the second, hot gluing it in place in the same orientation as the first, so the top of the pack alternates from positive terminals to negative terminals and back to positive terminals along the first three parallel groups.

Our range of electric bike parts includes OEM parts from Currie Technologies, the top dog of the electric bike industry. Currie Technologies is the manufacturer of the eZip and IZIP lines of electric bicycles, making them ubiquitous with quality electric bicycle products. Currie Technologies produces many (but not all) of the electric bike conversion kits that Monster Scooter Parts carries. No matter how you approach it, Currie Technologies is the brand to get when purchasing electric bicycle parts. In addition to the Currie Technologies parts that Monster Scooter Parts carries, we also carry electric bicycle motors and electric bicycle conversion kits from the Golden Motor Company. Golden Motor electric bike kits are customizable to almost any application, making them a good fit for the Do-It-Yourself electric bike enthusiast.

If you are using 2.5AH cells then yes, it will be 5AH with a 2p configuration. If you use cells with higher capacity, like Sanyo GA cells that are 3.5AH, then you’ll have a 7AH pack with only 2p. Make sure your cells can handle the current that your electric scooter (and namely the controller) will try to draw from it.

Latest BBS02 48V 750W 8Fun Bafang Mid Drive Ebike Conversion Kit BB:68mm Electric Bicycle. – BBS02 Mid-Drive Motor: 1 pc. – Power: 750W. ≤1.8 127±6 750W 112±6 ≥78% ≥60 ≤20.5 ≥120 ≥80% Kits Included. – Left Crank Right Crank: each 1 pc.

I like to cut most of my nickel strip in advance so I can just weld straight through without breaking my flow to stop and cut http://electricbikemotor.net nickel. I measured out the width of three cells and cut enough nickel strip to weld the top and bottoms of 10 sets of 3 cells, meaning 20 strips of nickel that were each 3 cells wide, plus a couple spares in case I messed anything up.

Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.[38][39] Some manufacturers, such as the Canadian BionX or American E+ (manufactured by Electric Motion Systems), have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.[40] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.[41] The bicycles were then charged from the mains, as is common today. While ebike batteries were produced mainly by bigger companies in past, many small to medium companies have started using innovative new methods for creating more durable batteries. State of the art, custom built automated precision CNC spot welding machines[42] created 18650 battery packs[43] are commonly used among Do-it-yourself ebike makers.

A quick note: when you get into large sizes of heat shrink, the method of quoting the size often changes from referring to the diameter of the tube to referring to the flat width (or half the circumference when in a circle). This is because at these large sizes, it’s not so much a tube anymore as two flat sheets fused together, sort of like an envelope. Keep that in mind and know what size is being quoted when you buy your large diameter heat shrink tube.

Oh, one last thing. If you have a poorly formed connector or the wires are fraying, that can increase resistance and cause a voltage drop that might trip a cutoff condition. Just another thing to check for.

You don’t know Ecospeed. If you did, and if you tested, you would realize that Ecospeed should be rated as the number one mid drive system out there. Based on years in business, satisfied customers, technology, engineering, and service. I know, since I have had Ecospeed for 5 years or more and I have two of the latest iterations of Ecospeed (one mtn bike and one recumbent) and use it to climb 2500 vertical feet of logging roads regularly. And it is fantastic.

Many people are tempted to use cheaper 18650’s sold under names like Ultrafire, Surefire and Trustfire. Don’t be one of those people. These cells are often marketed as up to 5,000 mAh but struggle to get more than 2,000 mAh. In actuality, these cells are just factory rejects, purchased by companies like Ultrafire and repackaged in their own branded shrink wrap. These B-quality cells are then resold for use in low power devices like flashlights where their weaker performance is less of an issue. If a cell costs less than $2, it simply isn’t worth it. Stick to the name brand cells, like my favorite Samsung cells, if you want to build a safe, quality ebike battery.

One Reply to ““e-bike battery |cheap electric bike conversion kit””

  1. These guys (Applied Future Technologies) are in Australia, and although they use the same motor and geared reduction as Cyclone, the rest of the kit parts are heavy duty and this fixes many of the complaints from Cyclone users. The distinctive added fins help the Headway motor shed heat much faster.
    When we add the fourth parallel group, we’ll again hot glue it in place in the opposite orientation of the third parallel group (and the same orientation of the second parallel group) and then weld it on the opposite side as we welded between the second and third group (and the same side as we welded between the first and second group).
    It’s always hard to say exactly how much AH’s someone will need because every case is different. With that powerful motor sucking lots of juice and big hills though, you are going to want a minimum of 48V20AH. If I were you I would try to go even higher, but it may be even better to simply have two batteries at that point. It’s annoying to swap them, but if you ever had a problem with a 48V30AH battery that destroyed the pack, it would be a big investment straight to the garbage. A problem in one of your smaller packs would mean you still had the other. It’s not likely to happen, but it’s something to think about.

Leave a Reply

Your email address will not be published. Required fields are marked *