Hi Clyde, each electric bike or brand uses a different system with different displays, throttles (thumb or twist) and pedal assist (cadence or torque). I’ll try to break it down for you quickly but you can see me using and explaining each system by watching video reviews here on the site 🙂
Common lithium cobalt oxide (LiCoO2) batteries can catch fire or explode during loading and even when just stored. The safety depends on user precautions and the quality of the Battery Management System (BMS).
Power: 500W / 36V. Allow you to swap two power modes between the full 500W power to 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle). Still remain the full 500W power with no speed control.
8. Rights Granted by you: By entering this content you understand that Electric Bike Technologies LLC, anyone acting on behalf of Electric Bike Technologies LLC, or its respective licensees, successors and assigns will have the right, where permitted by law, without any further notice, review or consent to print, publish, broadcast, distribute, and use, worldwide in any media now known or hereafter in perpetuity and throughout the World, your entry, including, without limitation, the entry and winner’s name, portrait, picture, voice, likeness, image or statements about the Sweepstakes, and biographical information as news, publicity or information and for trade, advertising, public relations and promotional purposes without any further compensation.
It is possible to do it that way, however there are some compelling reasons not to. 1) By first joining all the series cells you would end up with multiple high voltage groups, which means both the chance and consequences of an accident are greater. When you’re working with lots of exposed batteries with nickel conductors and metal tools flying around, the last thing you want is more high voltage possibilities for shorts. 2) Doing series cells first would be come unwieldy, physically. A series group is only connected at either the top or bottom of alternating cells. Without having multiple cells side by side to add stability, a long chain of single cells will need either a pile of glue or some type of physical holder to support the chain. and 3) most battery spot welders can only reach about 2 cells deep into a pack, meaning you’d have to either add very short nickel strips to each series group connecting only two groups (which means twice the welding and twice the cell damaging heat) or have long uncontrolled nickel strips hanging off the sides, again risking shorting.
This is a very simple layout where each column of 3 cells is connected in parallel and then the 10 columns are connected across in series from left to right. The BMS board is shown at the far right end of the pack. You’ll see how the pack represented in the drawing will come together in real life shortly.
In the end, I opted for a DPDT+OFF rocker switch, as using diodes introduced forward voltage drop and this interfered with charging enough for me to have second thoughts. This arrangement does require that the BMS be “flashed” to initiate it, which can be done by the charger in charging mode but for discharging, I found that shorting the B- and the P- for less than a second initiated the BMS and it then latched itself on, so I installed a reset button. If I had used a DPDT switch without an off position then I would not have needed to do this. However, when the BMS hits a low voltage group e.g. going up a steep hill, it will not automatically reset when the voltage recovers, so you need to use the reset button if you want to get the last bit out of the battery. I’m toying with latching this button when discharging, as the voltage drop knocks the controller out, so I think I’ll get a reaction like traction control, without having to manually reset the battery (which is annoying as it’s in a backpack).
The Bosch Performance Line motor is an electric bike drive systems that offers a balanced mix of performance, range and reliability. The design of the Performance Line system allows the motor to give you peak torque in each of your gears, making for great hill climbing ability with low power usage.
I just have a simple question: I would like to replace the Nicad battery 24V / 5Ah of my old Yamaha PAS XPC26 with a 7s3p and maybe try a 8s3p for something more “punchy” (hoping the controller will not burn …) . Do you think I can buy a 10s BMS and use it with a 7s or 8s battery? In this case, what should I do with the spare balance wires ?
If you are using 2.5AH cells then yes, it will be 5AH with a 2p configuration. If you use cells with higher capacity, like Sanyo GA cells that are 3.5AH, then you’ll have a 7AH pack with only 2p. Make sure your cells can handle the current that your electric scooter (and namely the controller) will try to draw from it.
We Can Build It. Built by hand in Pennsylvania, mostly by Harry and Alec. Custom Wheelbuilding Some batteries for electric bike don’t know that we build every one of our wheels here by hand in Pennsylvania. This lets us control each step of the process, ensuring that the spokes are uniform, straight, and undamaged, allowing us to apply spoke-prep to the spokes, oil to the nipple seats, and inspect the rims before…
Description: Use this 1000W 48V 26″ electric bike conversion kit to transform your bike and eliminate the need for purchasing a brand-new electric scooter. The motorized wheel, electric controller, …
40% grade hills? That’s huge! You’ll definitely want a cell that can perform at high current since you’ll be pulling peak power from those cells to get up those big hills. Something like the Samsung 25R would be a good choice for this application.
I buy that pink cells, Samsung ICR18650-26F. The cells have 3,9V, is a little too, only one with 3,82 and the other 3,87. I want to do a pack with 4parallel and 7serie (28 cells), it is acceptable conect them? Any sugestion is welcome.
An exceptionally affordable, feature rich electric bike, built around an approachable frame that’s easier to mount and stand over, offers pedal assist and throttle override operation. The battery pack is protected by the top tube, positioned low and center along the……
When it comes to buying your cells, you might be able to find a local source, or you can order them straight from Asia. I prefer the second option, as you’ll usually get a much better price going straight to the source, even when paying for international shipping. One caveat though: do your best to ensure that your source sells genuine cells and not knock-offs. Do this by checking feedback and using a payment method that ensures you can get your money back if the product isn’t as described. For this reason, I like to buy my cells on Alibaba.com and AliExpress.com.
Here is a an example of a large format soft pouch LiPo pack with 13 cells, and a BMS. This pack was built using cobalt LiPo soft cells with a BMS from a Chinese factory for an electric bike. You can see the top cell has been squished, causing the cell to fail and the BMS to shut down the battery, and not allowing it to charge or discharge. This pack is small and light (7lbs). This $500 pack is now ruined, but all is not lost since it did not start a fire, and it did NOT take the house with it.
Hi Court, I have recently purchased a new adult tricycle with the intention of converting it to an electric motor. I am feeling a bit overwhelmed with all the different motor options and configurations available. I want something that will provide me with enough power to get up to speed, and have a long ride time. I have seen YouTube videos where they have linked multiple batteries to get extended ride time. What are your recommendations to get a long ride, with the power for a tricycle and a big rider?
This had led me to believe that if there is too much load being exerted on the bike (i.e. the current being drawn from the battery is too high) then either the BMS or the controller trips and cuts out. However I am reluctant to believe that the BMS is causing the trouble as it has a 40A rating on it (this link shows the exact BMS) http://www.aliexpress.com/item/Electric-motor-car-13S-48V-40A-BMS-lithium-ion-battery-BMS-Used-for-48V-20Ah-30Ah/32484213150.html?spm=2114.13010608.0.62.evx6sX .
1. Eligibility: Sweepstakes (the “Sweepstakes”) is open only to those who sign up at the online sweepstakes page and who are at least 18+ years old at the time of entry. The sweepstakes is open to the legal residents of the Contiguous USA and Canada and is void where prohibited by law. Employees of Electric Bike Technologies LLC (the “Sponsor”) their respective affiliates, subsidiaries, advertising and promotion agencies, suppliers and their immediate family members and/or those living in the same household of each are not eligible to participate in the Sweepstakes. The Sweepstakes is subject to all applicable federal, state and local laws and regulations. Void where prohibited.